6
Use
Clean the subwoofer regularly with a soft, damp microfiber
cloth. Please be absolutely sure to observe the following notes
in the process:
• If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
Cleaning and care
Danger
Risk of electric shock!
In contact with live parts, water can lead to electric
shock or short circuit.
• Make sure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.
Attention
Risk of damage!
Using the wrong cleaning materials may damage
the delicate surface of the case.
If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
In no circumstances should caustic cleaning products, white
spirit, thinners, petrol or similar be used for cleaning.
Activating and deactivating
With the switch
6
“Power” you can turn the power supply on or
off. If the subwoofer is activated, the power LED
5
is illuminated
in green. In standby mode it is illuminated in red.
Automatic activation/deactivation
With the switch
4
“Power Mode” you can switch the operating
state:
Auto On:
The subwoofer activates as soon as an audio signal
is present on the input jack
1
“Line In”. If there is no
audio signal for some period of time, the subwoofer
switches to standby.
On:
The subwoofer is continually activated.
Auto On Level
You can adjust the sensitivity for the activation of the sub-
woofer with the allen screw “AUTO ON LEVEL”
2
. Turning the
screw in a clockwise direction increases the sensitivity of the
auto-on function. This means that the subwoofer will already be
activated by a very low audio signal.
Subwoofer volume
With the control “Subwoofer Volume”
3
you can set the volume
of the subwoofer.
1
2
3
5
4
6
7
8
