5
Setup and connection
Screen
Stereo triangle
Center
US 5305/1
Front
Center
Front
Rear
Rear
Setup notes
• Select a stable, level base.
• Make sure that the environment is clean and free from dust.
• Avoid placing the unit close to sources of heat or in direct
sunlight.
• Arrange the connector cables so that they do not pose a trip
hazard.
• Do not place any heavy objects on the cables or the speak-
ers.
• The location of the subwoofer can be freely selected and
does not influence the other speakers. However, do not place
it in the corner of a room as this may cause uncontrollable
frequency overloads. A location between the front speakers
is often ideal.
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
• Pull the mains plug of your AV receiver out of the socket.
• Ideally, you should connect the subwoofer with the
subwoofer output of the AV receiver using an RCA mono
cable.
The RCA jack
1
“LINE IN” on the back side of the subwoofer
is used for this. You can buy the suitable cable in our web
shop.
• If your AV receiver does not have a connection for a
subwoofer, connect an available speaker outlet with the RCA
jack
1
of the subwoofer using a voltage reducer and an RCA
cable. We offer voltage reducers on our website in the “Ac-
cessories” area.
Connection to a power supply
• Ensure that the mains switch
6
“Power” on the subwoofer is
switched off (“0 OFF” position).
• Connect the mains connector jack
7
with a mains socket
using the power cord.
• Also plug the mains plug of your AV receiver back into the
socket.
1
6
7
