Teufel IP 7000 BR, Техническое описание и инструкция по эксплуатации

Страница: 10 / 32

10
• IP 7000 BR
FM antenna
Danger Risk associated with lightning strike!
If you use a roof or outdoor antenna, ensure
that the antenna unit has suitable lightning
protection .
To receive FM/VHF stations, connect the antenna to
the jack 13 “FM” . This may be a roof/outside antenna,
but also a cable television connection . You will need a
coaxial connector cable for this .
If no antenna connection is available at the installation
location, you can use the enclosed throw-out antenna
d
. Connect the antenna to the “FM” jack
13
and adjust
the position of the throw-out aerial for optimal reception .
Then fix the antenna in place with tape or a nail .
16 13
–
Network/Internet
The receiver requires a network connection for Internet-
based functions (BD Live), media streaming (DLNA) and
program updates . Connect your network or router to the
jack 16 “LAN” using a network cable .
Important
The length of the network cable must not
exceed 3 m .
Connection to the grid
25
–
• Connect the network jack
25
to a mains socket using
the power cord mains cable
e
.
Remote control
In order to operate the remote control, you will need
two type AAA 1 .5 Volt micro batteries (included in the
product contents) .
Inserting batteries
1 . Gently push on the ridged surface of the battery com-
partment cover on the back of the remote control and
push the lid down . Remove the cover .
2 . If necessary, remove the old batteries (please observe
the notes on page <?>) .
3 . Insert the batteries according to the image on the
battery compartment; in the process, make sure the
polarity is correct .
4 . Place the cover back on the compartment and push it
closed .
Functionality
The remote control relays the control signals by means of
infrared light . For this, you will have to point the front of
the remote control towards the receiver . Make sure that
the infrared light is not obstructed by objects .
Fluorescent lamps and energy-saving lamps installed in
the direct vicinity may affect the functions of the remote
control or impair them .
First activation
The first time you activate the IP 7000 BD, it will request
the most important settings in “Quick setup” . You can
change any of the settings later on .
• Menu language – if applicable, select “English” .
• TV resolution – you should select “Autom” when con-
necting the TV set via HDMI . Please observe the notes
in the operating instructions for your TV set and the
point “Resolution” on pages 13 and 17 .
• Aspect ratio – determines how videos in 4:3 format
will be displayed on 16:9 screens and vice-versa (see
“Aspect ratio” on page 13 for details) .