APPLIANCE
APPLIANCE
AQUARIUM
POWER
CORDS
DRIP LOOP
DANGER: Since water is employed in the use of aquarium equipment, spe
cial care
should be taken to avoid electric shock. For each of the following situations, do not
attempt to repair the appliance yourself. Retur
n it to an authorized service facility
for service, or discard it.
1. A.
If the appliance falls into the water
, do not reach for it.
First unplug it and then retrieve it.
B. If electrical components of the appliance get wet,
unplug the appliance immediately.
C. Car
efully examine the appliance after installation.
It should not be plugged in if there is water on parts
not intended to get wet.
D. Do not operate any appliance if it has a damaged cor
d
or plug, if it is malfunctioning, or if it has been dropped
or damaged in any manner.
E. T
o avoid the possibility of water dripping onto the
appliance plug or outlet, position aquarium stand and
tank to one side of a wall-mounted outlet. A “drip loop” (see illustration) should
be arranged for each cord connecting an aquarium appliance to an outlet. The
“drip loop” is the part of the cord below the level of the outlet (or extension cor
d
connector) that prevents water fr
om traveling along the cord to the outlet. If the
plug or outlet gets wet, do not unplug the cord. Disconnect the fuse or cir
cuit
breaker that supplies power to the appliance. Then unplug the app
liance and
examine the outlet for presence of water
.
2. Close supervision is necessary when any appliance is used by or
near children.
3. T
o avoid injury, do not contact moving parts or hot parts such as heaters, r
eflectors,
lamp bulbs, etc.
4. Always unplug an appliance fr
om an outlet when it is not in use, before putting on
or taking off its parts, and befor
e cleaning it. Never yank cord to pull plug fr
om outlet.
Grasp the plug and pull to disconnect.
5. If an extension cor
d is necessary, a cor
d with a proper rating should be used. A cor
d
rated for fewer amperes or watts than the appliance rating may overheat. Car
e
should be taken to arrange the cord so that it will not be tripped over or pulled.
6. Do not use an appliance for other than its intended use. The us
e of attachments not
recommended or sold by the appliance manufactur
er may cause an unsafe condition.
7. Do not install or stor
e the appliance where it will be exposed to the weather or to
temperatures below fr
eezing.
8. Make sur
e the appliance is securely mounted on aquarium befor
e operating it.
KEY
ITEM DESCRIPTION
MODEL SIZE
1
Clear Lid
29051-00
2
AC Low Voltage Adapter Plug
29054-00
3
Filter Assembly
25846-00
4
LED Light with
White LEDs
29052-00
GloFish
®
Replacement LED Light
5
LED Light with
Blue LEDs
29053-00
Parts Diagram & Identification
Replacement Parts List
For questions or missing parts
contact customer service at
(800) 526-0650 • www.tetra-fish.com
M-F 7:30 A.M. to 5:30 P .M. Easter
n Time
© 2011 Tetra Holding, Inc.
1
LIMITED WARRANTY: Within one year from the date of original purchase,
we will repair or replace, at our option, any LED Aquarium Kit which is deemed
defective in workmanship or materials. This includes: Cube, Base, LED Light,
AC Adapter, and Filter Housing.
If the LED Aquarium Kit is found to be defective, and has not been modified,
damaged or misused, please return the unit with a copy of the receipt and
proof of date of purchase: Call (800) 526-0650 for return authorization and
shipping address.
Damage or injuries resulting from improper installation, negligence or misuse
are expressly not covered by this warranty. Incidental or consequential
damages are specifically excluded.* Fish loss, personal injury, property loss or
damage resulting from use of these products are not covered by this warranty.
Incidental or consequential damages are specifically excluded.* This warranty
gives you specific legal rights. You may also have other rights which vary from
state to state.
*Because some states do not allow the exclusion of incidental or consequential
damages, this exclusion may not apply to you.
SYMPTOM
COMMENTS/SOLUTIONS
If the filter does
not start. .
If the LED Light
won’t turn on. . .
• Make sure that the Airline Tubing and Diffuser Tube
are attached properly and that the O-Ring in the Diffuser
Tube is in place.
• With dry hands, make sure the Air Pump is plugged
into a working electrical source.
• Make sure that the AC Adapter is plugged into an
electrical source. Check to make sure that the AC
Adapter Jack is inserted fully into the plug on the back
of the LED Light Box.
Troubleshooting Guidelines
Customer Support: 800.526.0650 • www.tetra-fish.com
11/11 P/N 29133-908
IMPORTANT:
Always unplug your
LED Aquarium Kit when
inspecting or disassembling
for any reason
LED Aquarium Kit
For Optimum Performance
1. Replace filter cartridge (Tetra Cartridge size small)
every 2 to 3 weeks for optimal fish health.
Available at your local retailer.
2. NEVER plug the Air Pump in without water
in the Aquarium.
3. NEVER immerse Air Pump in Water. Air Pump
NEVER needs oil.
4. Clean outside of Air Pump with damp cloth
and mild detergent.
Replacement
Filter Cartridge
Tetra Whisper
Bio-Bag size small
2
3
4
IMPORTANT SAFEGUARDS
WARNING:
To guar
d against injury, basic safety pr
ecautions should be observed, including the following.
READ AND FOLLOW
ALL
SAFETY INSTRUCTIONS
SAVE
THESE INSTRUCTIONS
5
GloFish
®
29133_908TLEDAK1&halfgMassManual_11_11.indd 1
11/22/11 9:01 AM
