Tetra Pak COMET RC, Руководство пользователя

Страница: 20 / 118

CRC910B E
5-5
Tetra Pak
Hoyer
5.2.6 Topping/pencil filler station adjustment
Loosen the screws (Pos. 1/2, Fig. 5.7-5.7a) to
adjust topping/pencil filler height and centre it over
the slot, then tighten the screws again when finished.
Turn on the chocolate heater thirty minutes before
5.2.7 Granule station adjustment
Before beginning production, check that the hopper
and dosing channels are completely dry.
Also check that the dosing channels are centred over
starting production using the switch (Pos. 8, Fig. 5.17).
F
NOTE:
Make sure that there is water in the water jacket at
all times to prevent the heaters from burning.
Fig. 5.8
the slots, and if not, adjust the position of the station
by slackening the screws (Pos. 1, Fig. 5.7) on the
fixing blocks.
2
1
Fig. 5.6a
2
1
2
1
2
1
Fig. 5.7 Fig. 5.7a