TESVOLT TS Series, Руководство по установке

Страница: 41 / 46

13 BMS Monitoring (BatMon) menu structure
The battery parameters are password
protected. Since these parameters directly
affect the battery, only TESVOLT certified
technical specialists are permitted to
configure these parameters. You can obtain
the password by directly requesting it from
TESVOLT GmbH.
The value indicates the percentage to which the battery has been charged. 100%
refers to a fully charged battery. SoCs above 100% may occur since the batteries
have higher capacities upon delivery. The BMS-Unit can use the measured
parameters to determine the state of charge of a single cell, or cell stack, and stop
the charging process if necessary. This prevents overcharging. The software
also has the same functions for monitoring the discharge process in order to
prevent unnecessary discharging of the cells. The system stops discharging of the
battery when a defined minimum state of charge is reached.
This value indicates the health of a cell. Precise monitoring allows the system to
detect performance differences between individual cells and thus
detectdamaged/defective cells. The system switches off if necessary and notifies
the Sunny Island.
39
www.tesvolt.com
Battery Output
Battery voltage
Battery temperature
Charge/Discharge
Cells
Balancingmode
Charging cycle (kWh)
SoC (state of charge)
SoH (Health)
Warning - Time
Cell temperature
Cell voltage
Serial Port
SoC (cell)
SoH (cell)
Events Event Logbuch
Parameter
Battery
System Current errors
Firmware Update
SOH – State of Health – Alterungszustand SOC – State of Charge – Ladungszustand
E.IA. .ENG- TS A.6