TESVOLT TS Series, Руководство по установке

Страница: 25 / 46

Master connection
+
_
+
_
23
www.tesvolt.com
Position
A
Description/Note
Description
B
Battery connection
Conductor cross-section: 50 mm² ... 120 mm²
Cable diameter: 14 mm ... 25 mm
Tightening torque: 12 Nm
cabel DC –
cabel DC + D
E
Cable for the control voltage
AC power cable
Sunny Island: Connection AC1 Loads/SunnyBoys connection, L and N
Switching device: Connection X5 Terminals L and N,
conductor cross-section: 2.5 mm² ... 16 mm²
Sunny Island: Connection AC2 Gen/Grid Terminals L,
NTT and PE, switching device: Connection X3 Terminals
L1, N and PE , conductor cross-section: 10 mm² ... 16 mm²
C
Measuring cable for voltage
measurement
Sunny Island: Connection ExtVtg Terminals L and N,
switching device:: Connection X4 Terminals L1 and N,
conductor cross-section: 1.5 mm² ... 2.5 mm²
F
Battery temperature sensor
measuring cable
Sunny Island: Connection BatTmp
Only Lead-acid batteries require connection of a battery temperature
sensor. The battery temperature sensor must be mounted in the
middle of the battery array, in the upper third of the battery cell.
E.IA. .ENG- TS A.6