TESTO Sensor LD pro, Инструкция по эксплуатации

Страница: 5 / 48

Safety instructions
Testo Sensor LD pro - V2.00
Page 5 of 48
3 Safety instructions
3.1 About this document

Read carefully this documentation and familiarize yourself with the product
before putting it to use. Pay particular attention to the safety warnings to prevent
injury and product damage.

Keep this documentation to hand for easy reference when needed.

Pass on this documentation to any subsequent users of the product.
3.2 Ensuring safety

Only use the product as intended and within the parameters specified in the
technical data. Do not use force for operating.

Never measure with the device at or near live/energized parts!
During leak detection on electrical systems, please maintain a sufficient safety
distance to avoid dangerous electric shocks!

Avoid any direct contact with hot and/or rotating parts.

Always switch on the device before putting on the headphones! At high signal
levels (bar graph headphones in the red area), the volume can be correspondingly
high. The sensitivity setting can be used to reduce the volume.

Never point the laser directly into eyes! Absolutely avoid a direct irradiation of
eyes of humans and animals!
Laser module: corresponds to DIN EN 60825-1: 2015-07 Class 2 (<1mW)

Observe the prescribed storage and operating temperatures.

Improper handling or violence will void the warranty.

Any kind of interventions on the device, as far as they do not correspond to the
intended and described procedures, lead to the warranty expiration and to the
disclaimer.

The device is intended solely for the described purpose.

A use in hazardous areas is not allowed.
3.3 Environmental protection

Disposal of faulty rechargeable batteries / empty batteries in accordance with applicable
legal regulations.

Lead back the product after the end of the period of use to the separate collection for
electric and electronic devices (observe local regulations) or return the product to Testo
Sensor GmbH for disposal.
Testo Sensor GmbH assumes no warranty as to its suitability for any particular purpose and assumes no
liability for any errors contained in this manual. Nor for consequential damages in connection with the
delivery, performance or use of this device.