Operation
Testo Sensor LD basic V1.00 EN
Seite
14
von
22
11.3.3
System settings
11.3.3.1
System update
If required, there is the possibility for the Testo Sensor LD basic to download a firmware via
the USB stick.
The file must then be stored on the USB stick and transferred to your device as described
below.
Settings
➔
System
➔
System-Update
P1: V033
C1
I1
Update Kanäle
11.3.3.1.1
Check for Updates
Settings
➔
System
→
System-Update
➔
check USB-Stick for new Updates
P1: V033
C1
I1
Update Kanäle
If it is required to install an older software version, you have press the button
„Force all“
.
Overview of
System-Update
-Functions.
f after pressing the button
“Check USB Stick
for new Software
updates”
the following
messages appear in the window, is the Testo
Sensor LD basic is not properly connected to
the USB flash drive or there are no files
available.
I If the Testo Sensor LD basic is correctly
connected to the USB stick and there are new
versions of the individual SW Parts, the new
versions are marked in red.
The update is started by pressing the
„
Update selections
“
button.
