TESTO 6681 Profibus, Инструкция по эксплуатации

Страница: 126 / 154

126
P2A software
- 3.3 Using the software
Self-
adjustment
every
Setting the cycletime in which the self-adjustment is
to be performed.
In order to receive reliable readings during
the calibration or equalization period of the
probe, testo recommends the shortest
possible cycle time.
A longer cycle time can be set in continous
operation.
Start self-
adjustment
Start self adjustment at a defined time outside the
cycle time.
3 Click on [Apply] .
Changes are saved.
3.3.2.2 Saving parameters
Parameters can be saved in new parameter files.
1 Mark instrument/parameter file
2 Click on File > Save as in the menu bar.
3 Select storage location and enter the file name.
4 Click on [Save] .
The new parameter file is shown in the file list.
Only the parameters are saved from an instrument file, the history data
are not adopted.
The original name (Instrument type, Serial number) is
suggested with the current date/time as standard, e.g.
"testo 6681 01234578 061120 1403.cfp".
For a standard installation, the files are saved under
"C:\Documents and Settings\All Users\Shared
Documents\P2A Software". The path can differ depending on
the version of the operating system.
3.3.2.3 Open parameter file
All parameter files stored in the standard directory path are automatically
displayed in the file list when the software is started.