TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 54 / 106

6 Using the product
54
Change parameter / unit in a line :
1. Select the line: [▲] , [▼] → [Change]
2. Select the parameter:
[▲]
,
[▼]
→
[OK]
3. Select the unit: [▲] , [▼] → [OK]
4. Save changes: [OK]
Options:
> [Options] → Number of lines : Change the number of
measuring values per display page.
> [Options] → Blank line : Insert the empty line before the
selected line.
> [Options] → Delete line : Delete the selected line.
> [Options] → Factory setting : Reset the readings display to
factory setting.
6.1.2.3. Units
(only available via Meas. Box tab)
The units used for parameters in configuration menus can be set.
Calling up the function:
>
[ ] → Device settings → [OK] → Units → [OK]
Adjustable units
Parameter Unit
Altitude m, ft
Length
cm, inch, mm
Pressure mbar, psi, inHG, inW, hPa
Area mm², in²
Volume
m³, l
Volume flow m³/h, l/min
Time sec, min
Setting the unit
1. Select the line: [▲] , [▼] → [Change] .
2. Select the unit:
[▲]
,
[▼]
→
[OK]
.
3. Confirm the entry: [Finished]