TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 46 / 106

5 First steps
46
Parameter Description
Dewpoint
The parameter "Dewpoint" (combustion air
dewpoint) influences the calculation of qA (flue
gas loss) and flue gas dew point. The factory
setting for the dewpoint is 1.5°C. To achieve a
higher accuracy, the values can be adjusted to
the actual ambient conditions.
4. Finalise the entry: [Finished] .
Other location options:
> [Options] → Edit location : Make changes to an existing
location.
> [Options] → Copy location : Make a copy of an existing
location in the same folder.
> [Options] → Delete location : Delete an existing location.
Create a new folder :
1. [Options] → New Folder → [OK] .
2. Enter values or make settings.
3. Finalise the entry: [Finished] .
Other folder options:
• Edit Folder : Make changes to an existing folder.
•
Copy Folder
: Make a copy of an existing folder.
• Delete Folder : Delete an existing folder, including the locations
created therein.
• Delete All Folders : Delete all existing folders, including the
locations created therein.
5.4. Measurement records
Meas. box
Measurement data are always saved in a measurement record in
the meas. box with which the measurement data were measured.
An overview with all created folders and locations is displayed. The
measurement records saved for the corresponding locations are
displayed. Measurement records can be displayed, printed, deleted
and copied to the Control Unit.
Control Unit
Locations cannot be saved in the Control Unit. Measurement
records saved in the meas. box can be copied to the Control Unit,