TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 41 / 106

5 First steps
41
- The Welcome Screen is displayed (approx. 5s)
- The Control Unit display screen appears.
- The Control Unit searches for connected meas. boxes and
shows these as independent tabs in the display.
Control Unit and meas. box are not connected:
If the Control Unit has already been switched on, you must
press
[ ] once again for a short moment to set up a
connection to the meas. box.
5.2.6. Calling up a function
1. Select function: [▲] , [▼] .
- The chosen function appears in a frame.
2.
Confirm selection: [OK] .
- The chosen function is opened.
5.2.7. Entering values
Some functions require values (numbers, units, characters) to be
entered. Depending on the function that is chosen, the values are
entered via either a list field or an input editor.
List field
1. Select the value to be changed (numerical value, unit): [▲] ,
[▼ ] , [ ◄ ] , [ ► ] (depending on the selected function).
2. Press [Change] .
3. Set value: [▲] , [▼] , [ ◄ ] , [ ► ] (depending on the selected
function).
4. Confirm the entry: [OK] .
5. Repeat steps 1 and 4 as required.