TT-SX 900x Series High-Voltage Differential Probes User Manual
15
4.2
Key Features and Description
Features
Description
Attenuation Selection
Button & LED Indicators
Press the Attenuation selection button to switch
between the two ranges. LED indicator will light
green for attenuation selected.
Power Button
Press to turn unit on.
Press and hold for 5 seconds to turn unit off.
Power and Overload
indicator LED
LED will turn green when the unit is on.
LED will turn red when the unit is in voltage
overload condition.
(Dimming of LED may indicate low batteries.)
4 mm Sheathed Banana
Plug Connectors
Connects the probe to the DUT using probe
hook pair provided with the probe.
Insulated BNC Male Output
Connector
The
probe’s output connect is full insulated and
connects directly to
an oscilloscope’s BNC
female input channel connector.
USB-C Input Power Port
(on side of probe)
Use USB-C Power Port to connect with USB
cable when powering from mains adapter or
oscilloscope’s USB port.
4.3
Supplied Accessories
Accessories
Part Number Quantity
TT-SX GR 1
Probe Hook, Pair
(black & red)
15650
1
TT-SX USB
USB Power Cord (1 m)
(USB-A to USB-C)
15651
1
