Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 23 / 32

23
XFTP SAT LITE Satellite Meter - Operation Manual
Local Oscillator Frequency
To change the selected local oscillator frequency for the satellite dish
LNB, use the or Direction Buttons to highlight the
LO Field,
then press the Direction Button or
ENTER
Button.
To change the local oscillator frequency, use the alphanumeric keypad
to enter the new value, and then press the Direction Button or
ENTER
Button to complete your changes.
The range of the local oscillator frequency should be 0 MHz, 4500 to
5500 MHz, or 9500 to 11500 MHz.
Downstream Frequency
The downstream frequency is the frequency which is used for sending
a signal to earth from a satellite and is measured in MHz.
To change the downstream frequency, use the or Direction
Buttons to highlight the
F Field, then press the Direction Button or
ENTER
Button.
To change the downstream frequency, use the alphanumeric keypad to
enter the new value, and then press the Direction Button or
ENTER
Button to complete your changes.
The absolute value of the difference between the downstream
frequency and the local oscillation frequency should be in the range of
950 to 2150 MHz.