Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 22 / 32

22
XFTP SAT LITE Satellite Meter - Operation Manual
Changing Configuration Parameters
After you have loaded the satellite configuration parameters using the
procedure shown in the Viewing Satellite Configuration Parameters section
of this chapter, the configuration details screen will appear as shown in the
following figure.
Each parameter can be changed as shown in the following sections. After
making all of the desired parameter changes, you can save the new
configuration as described in the Saving Configurations section of this
chapter.
Configuration Name
To change the name of the configuration, use the or Direction
Buttons to highlight the
Name Field, press the Direction Button or
ENTER
Button, and then use the alphanumeric keypad to enter the
new name as shown in the following figure.
Note: The configuration name can contain letters and/or
numbers, but cannot exceed 8 characters.
Note: For more information about how to enter
alphanumeric values, see Chapter 2: Introduction, Using
the Alphanumeric Keypad .
When you are finished entering the configuration name, press the
Direction Button or
ENTER
Button to finish editing the name.