Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 13 / 32

13
XFTP SAT LITE Satellite Meter - Operation Manual
Entering Alphanumeric Characters
You can enter alphanumeric data for satellite configuration names by
using the or Direction Button(s) to highlight the desired field to
change, press the
ENTER
Button or the Direction Button, and then
press the alphanumeric buttons to enter the desired value.
To enter the next character, you must press the
ENTER
Button or
Direction Button to shift the cursor to the next character.
For example to enter the text “TEST”, perform the following steps:
•
Use the or Direction Button(s) to highlight the desired
field to change.
•
Press the
ENTER
Button or the Direction Button to edit the
highlighted field.
•
Press
8
TUV
to enter “T” in the field and then press the
ENTER
Button or Direction Button to move the cursor to the next
character.
•
Press
3
DEF
+
3
DEF
to enter “E” in the field and then press the
ENTER
Button or Direction Button to move the cursor to the
next character.
• Press
7
PQRS
+
7
PQRS
+
7
PQRS
+
7
PQRS
to enter “S” in the field and then press
the
ENTER
Button or Direction Button to move the cursor to
the next character.
•
Press
8
TUV
to enter “T” in the field.
•
Press the
ENTER
Button or Direction Button twice to
accept the changes.
Note: If you make an error when entering a number or
name, you can press the
C/S
Button or Direction
Button to backspace and then re-enter the text.