Limited Warranty Information
Accessories
The Weller® / ColdHeat
TM
Pro Soldering Tool
Battery Installation & Replacement
Cooper Hand Tools warrants to the original purchaser and any subsequent owner ("Buyer") that this product
will be free from defects in material and workmanship for a period of 90 days from date of purchase, provided
that no warranty is made with respect to products which have been altered, subjected to abuse or improperly
used, installed or repaired. Use of non-Cooper Hand Tools components will void this warranty if a non-Cooper
Hand Tools component is defective (or is the source of the defect).
Cooper Hand Tools will repair or replace products found to be defective not caused by a part, component or
accessory manufactured by another company, during the warranty period. Contact Cooper Hand Tools with
dated proof of purchase and return to Cooper Hand Tools, 1000 Lufkin Road, Apex, NC 27539. All costs of
transportation and reinstallation shall be borne by Buyers.
IN NO EVENT SHALL COOPER HAND TOOLS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
COOPER HAND TOOLS LIABILITY FOR ANY CLAIMS ARISING OUT OF THIS WARRANTY SHALL NOT EXCEED
THE PURCHASE PRICE OF THE PRODUCT.
THE PERIOD OF ALL IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS, OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO
90 DAYS FROM THE DATE OF PURCHASE BY THE USER.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied
warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Protected by U.S. Patent number 6,646,228.
Other U.S. and foreign patents pending.
See coldheat.com for more information.
The patented Split-Tip
TM
soldering tips are replaceable, and can be easily removed by gently pulling on the tips’
black housing. Please turn off power and allow the tip to cool before changing. There are three different Split-
Tips
TM
, the Chisel tip, the Bevel tip and the Conical tip:
To insert or change the batteries:
1.Slide the battery compartment cover (located on the
bottom of the tool) away from the tool.
2. Insert or replace batteries according to the polarity
diagram located above and also inside the tool’s
battery compartment.
3. Replace the battery compartment cover prior to use.
Battery Notes:
• Do not mix old and new batteries.
• Do not use rechargeable batteries.
• Remove batteries if not using the soldering tool
for an extended period of time.
• Dispose of batteries promptly and properly.
Thank you for purchasing the Weller® ColdHeat
TM
Pro Soldering Tool. The Pro Tool’s patented technology
creates the heat you need to solder within seconds, and its cordless design lets you operate it anywhere.
The patented Split-Tip
TM
combines unique material properties into two electrically insulated electrodes that
form part of an internal electrical circuit. Unlike regular soldering irons, the Pro Soldering Tool does not require
pre-heating the tip. When the tip’s two electrodes make simultaneous contact with an electrically conductive
material (such as a wire lead, terminal, solder, PCB pad, metal jewelry or other material), the circuit is
completed and the electrodes generate nearly instantaneous heat at the tip. The heat is then rapidly transmit-
ted to the work piece.
The Pro Tool has the highest available power, giving you more ability to work with larger projects. It will tin
wires up to 12 gauge (or equivalent mass).
Pro Soldering Tool Instruction Manual
Chisel - wide and flat-
faced tip is good for
larger
components
and applications.
Bevel - the most
versatile tip, useful
for general applica-
tions.
Conical - ideal for
precision soldering
and work in tight
spaces.
The Weller® ColdHeat
TM
Pro Soldering Tool uses five replaceable AA alkaline batteries. Please see battery
polarity diagram below for proper placement of batteries.
USE REPLACEABLE AA ALKALINE BATTERIES.
RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.
99 Washington Street
Melrose, MA 02176
Fax 781-665-0780
TestEquipmentDepot.com
