TESSERA TK-78K0R/KG3+UD, Руководство пользователя

Страница: 12 / 125

2.1.7 Starter kit USB driver
This is a software driver for PC to access to the USB interface of the
TK-78K0R/KG3+UD board.
2.1.8 The RF Test Program
The RF Test Program is used in [chapter 3 Experiences] .
The RF Test Program is provided in the form of the C source codes.
If you wish to tailor the RF Test Program to meet your specific needs, you
can edit the source code, re-compile it with debug build to generate a load
module file, then, start the debugger to load the tailored execution code on
to the microcontroller for further debugging on the project manager PM +.
Alternatively, if debugging is not required, you can make a release build to
achieve a new hex file, on the project manager PM +.
As a general remark, please respect your local regulation of
electro-magnetic emission. In general, it is suggested to use the
TK-78K0R/KG3+UD board in a radio anechoic chamber.
2.1.9 IEEE 802.15.4 MAC Library
The IEEE 802.15.4 MAC Library offers an executable object-code library of
the MAC stack specified in the IEEE 802.15.4. Please refer to the MAC
Library manual for further details.
2.1.10 The MAC Sample Program1 : Text Chat Program
The MAC Sample program 1 is developed to provide with a simple
example to construct a star network utilizing the IEEE 802.15.4 PHY/MAC
standard.
The MAC Sample Program 1 offers,
1). Designation of a network coordinator in a star configuration
2). Text chat between a coordinator and an end device
To use the MAC Sample Program 1, you need to prepare at least two PC
with a USB interface and two TK-78K0R/KG3+UD boards.
The MAC Sample Program 1 is provided in the form of
the C source
codes.
If you wish to tailor the sample program to meet your specific needs, you
can edit the source code, re-compile it with debug build to generate a load
module file, then, start the debugger to load the tailored execution code on
to the microcontroller for further debugging on the project manager PM +.
- 12 -