Tesla Smart Dehumidifier XL, Руководство пользователя

Страница: 15 / 200

15
Cautions:
When the temperature sensor of the evaporator copper tube of the machine is in an open or short
circuit, the buttons of the machine can still operate normally.
In this case, the machine can still work, but the effect will be slightly worse.
2. When the components of the temperature and humidity sensor are in an open or short circuit sta-
te or unable to connect, the digital tube will display E2 and flash. At this time, other buttons except
the humidity button will function normally, and it will be enter the Cont mode by default. It will return
to normal automatically after troubleshooting.
Automatic Defrosting:
1. When the temperature sensor fixed on the evaporator copper tube detects that the temperature
is less than -10°C, the machine will enter the automatic defrosting procedure. (The machine will start
automatic defrosting after 30min of dehumidification) At this time, the digital tube will display HS,
and the machine will automatically return to normal after the end of defrosting.
2. When the frost on the evaporator surface has melted, and its temperature is greater than or equal
to 2°C and the defrosting time is more than or equal to 10min, the defrosting action stops and the
dehumidification function activates.
Filter Replacement Reminder:
1. When the whole machine has been running for 2,200h in total, the power indicator will flash at the
frequency of 1s/time, reminding that the filter needs to be replaced. If the filter has been replaced,
you can long press the power button to reset.
Fault Detection of Temperature and Humidity Sensor:
When the power keeps on after pressing the ON/OFF button to shut down, the machine will re-
member how it worked before shutdown after pressing the ON/OFF button again.
When the power is cut off after pressing the ON/OFF button to shut down, the machine will work in
the initial default mode after pressing the ON/OFF button to power on again.
When the power is cut off while the machine is working, the machine will work in the initial default
mode after pressing the ON/OFF button to power on again.