Tesla MODEL S 2021, Руководство пользователя

Страница: 92 / 264

NOTE: If Autosteer Activation is set to Double Click and
Autosteer cancels because you started steering
manually, Traffic-Aware Cruise Control remains active. If
Autosteer Activation is set to Single Click and Autosteer
cancels because you started steering manually, Traffic-
Aware Cruise Control also cancels.
To disable Autosteer so it is no longer available, touch
Controls > Autopilot > Autosteer (Beta) .
Auto Lane Change
NOTE: Depending on market region, vehicle
configuration, options purchased, and software version,
your vehicle may not be equipped with Auto Lane
Change, or the feature may not operate exactly as
described.
When Autosteer is active, engage a turn signal to move
Model S into an adjacent lane (moving the steering yoke
would cancel Autosteer).
WARNING: It is the driver's responsibility to
determine whether a lane change is safe and
appropriate. Therefore, before initiating a lane
change, always check blind spots, lane markings,
and the surrounding roadway to confirm it is safe
and appropriate to move into the target lane.
WARNING: Never depend on Auto Lane Change to
determine an appropriate driving path. Drive
attentively by watching the road and traffic ahead
of you, checking the surrounding area, and
monitoring the instrument panel for warnings.
Always be prepared to take immediate action.
WARNING: Do not use Auto Lane Change on roads
where traffic conditions are constantly changing
and where bicycles and pedestrians are present.
WARNING: The performance of Auto Lane Change
depends on the ability of the camera(s) to
recognize lane markings.
WARNING: Do not use Auto Lane Change on
winding roads with sharp curves, on icy or slippery
roads, or when weather conditions (such as heavy
rain, snow, fog, etc.) may be obstructing the view
from the camera(s) or sensors.
WARNING: Failure to follow all warnings and
instructions can result in property damage, serious
injury or death.
Operating Auto Lane Change
Auto Lane Change is available whenever Autosteer is
active. To change lanes using Auto Lane Change:
1. Perform visual checks to make sure it is safe and
appropriate to move into the target lane.
2. Engage the appropriate turn signal, keeping your
hands on the steering yoke.
3. If needed, cancel the turn signal once you are in the
target lane.
NOTE: The minimum speed at which Auto Lane Change
operates may vary depending on region, adjacent lane
speeds, and other factors. Always be ready to manually
steer and change lanes as necessary.
Auto Lane Change moves Model S into the adjacent lane
in the direction indicated by the turn signal, provided
the following conditions are met:
• The turn signal is engaged.
• Model S does not detect a vehicle in its blind spot, or
a vehicle or obstacle up to the center of the target
lane.
• Lane markings indicate that a lane change is
permitted.
• Midway through the lane change, Model S must
detect the target lane's outside lane marking. If this
lane marking is not detected, the lane change is
aborted and Model S returns to its original driving
lane.
• The view of the camera(s) is not obstructed.
When an automatic lane change is in progress, Overtake
Acceleration is activated, allowing Model S to accelerate
closer to a vehicle in front (see Overtake Acceleration on
page 86 ).
NOTE: Auto Lane Change moves Model S one lane at a
time. Moving into an additional lane requires you to
engage the turn signal a second time after the first lane
change is complete.
When using Auto Lane Change, it is important to
monitor its performance by watching the driving path in
front of you and the surrounding area. Stay prepared to
take over steering at any time. As you are crossing over
into the adjacent lane, the instrument panel displays the
location in the lane that Model S is moving into.
Autosteer
90 MODEL S Owner's Manual