Tesla MODEL 3 2020, Руководство пользователя

Страница: 130 / 271

Summon (if equipped) allows you to
automatically park and retrieve Model 3 while
you are standing outside the vehicle. Summon
uses data from the ultrasonic sensors to move
Model 3 forward and reverse up to 12 meters
in, or out of, a parking space.
To move Model 3 a longer distance while
steering around objects, you can use Smart
Summon (if equipped) and your mobile
phone. Smart Summon allows your vehicle to
find you (or you can send your vehicle to a
chosen location). See
Smart Summon on
page 132 .
CAUTION: Ensure all cameras and
sensors are clean. Unclean cameras
and sensors, as well as environmental
conditions such as rain and faded lane
markings, can affect Autopilot
performance.
WARNING: Summon is designed and
intended for use only on parking lots
and driveways on private property
where the surrounding area is familiar
and predictable.
WARNING: Summon is a BETA feature.
You must continually monitor the
vehicle and its surroundings and stay
prepared to take immediate action at
any time. It is the driver's
responsibility to use Summon safely,
responsibly, and as intended.
WARNING: Summon's performance
depends on the ability of the
ultrasonic sensors to determine the
vehicle's proximity to objects, people,
animals, and other vehicles.
Before Using Summon
Before operating Summon, use the
touchscreen to enable it and customize how
you want it to work. Touch Controls >
Autopilot > Summon , then touch Customize
and adjust the following settings to suit your
preferences:
• Bumper Clearance : Set the distance that
you want Summon to stop from a detected
object (for example, you may want
Summon to stop within just a few inches of
a garage wall). Note that this distance
applies only to objects that Summon
detects directly in front of Model 3 when
moving forward, or directly behind Model 3
when reversing.
• Summon Distance : Set a maximum
distance that Model 3 can travel when
entering or exiting a parking space.
• Side Clearance : Choose an option to
specify how much side clearance you want
to allow. Tight allows Model 3 to enter and
exit very narrow parking spaces.
WARNING: Parking in a narrow
space limits the ability of the
sensors to accurately detect the
location of obstacles, increasing the
risk of damage to Model 3 and/or
surrounding objects.
• Require Continuous Press : By default,
Summon requires that you press and hold a
button on the mobile app or the key fob
accessory to move Model 3 during the
parking process. When Require Continuous
Press is set to NO , you can press and
release the button—you don't need to hold
it down to keep the vehicle moving. Also,
Require Continuous Press must be set to
NO if you want to operate Summon using
the key fob accessory instead of the mobile
app (see Operating Summon with the Key
on page 130 ), or if you want to start a
parking sequence from inside the vehicle
(see Starting Summon Before Exiting the
Vehicle on page 130 ).
• Use Auto HomeLink (if equipped): Set to
ON if you want to activate HomeLink to
open/close a programmed HomeLink
device (such as a gate or a garage door)
during the parking process when using
Summon. If enabled, the device
automatically opens and closes when
Model 3 enters or exits during a Summon
session. In a Smart Summon session (if
equipped), the device automatically opens
when, at the beginning of a session, Smart
Summon detects that Model 3 is parked in
a garage.
WARNING: Always ensure that
Model 3 is fully in or out of a garage
before HomeLink lowers the garage
door. Summon and Smart Summon
(if equipped) cannot detect where
an overhead door will lower.
Summon
128 MODEL 3 OWNER'S MANUAL