Tesla MODEL 3 2020, Руководство пользователя

Страница: 112 / 271

WARNING: The list above does not
represent an exhaustive list of
situations that may interfere with
proper operation of Autopilot
components. Never depend on these
components to keep you safe. It is the
driver's responsibility to stay alert,
drive safely, and be in control of the
vehicle at all times.
CAUTION: If a windshield replacement
is needed, take your vehicle to Tesla
Service. This will ensure appropriate
handling and mounting of the
camera(s). Failure to do so can cause
one or more Autopilot features to
malfunction.
Cleaning Cameras and
Sensors
To ensure the various Autopilot components
can provide information that is as accurate as
possible, keep them clean and free of
obstructions, condensation, or damage.
Occasionally remove any buildup of dirt by
wiping the components with a soft cloth
dampened with warm water.
Condensation can form inside the camera
enclosures, especially if you park your vehicle
outside in cold or wet conditions. The
touchscreen may display an alert stating that
a camera is blocked and that some or all
Autopilot features may be temporarily
restricted until the camera vision is clear. To
proactively dry the condensation,
precondition the cabin by setting it to a warm
temperature, turning the windshield defroster
on, and directing the front air vents toward
the door pillars (see Mobile App on page
186 ).
CAUTION: Do not use chemical-based
or abrasive cleaners. Doing so can
damage surfaces.
CAUTION: Avoid using a high-pressure
power washer.
CAUTION: Do not clean an ultrasonic
sensor or camera lens with a sharp or
abrasive object that can scratch or
damage its surface.
About Autopilot
110 MODEL 3 OWNER'S MANUAL