Tesla HM6220SX, Руководство пользователя

Страница: 4 / 84

4
ENG
32. Turn off the appliance before removing the
safeguards. After cleaning, install the safeguards
according to instructions.
33. Cable fixing point shall be protected.
34.
CAUTION: If the glass of the stove is broken,
turn off any heating element immediately and
disconnect the appliance from power source,
do not touch the surface of the appliance and
do not use the appliance.
35. User should not handle the cooker by himself.
36. Use shall be careful when cleaning gas burners. It
may cause personal injuries.
37. Since the hob is hot during cooking or right after
cooking, scalding may occur due to extreme
temperature and steam.
38. When not turning of the cooker during cooking,
user can touch hot surfaces causing burns.
39. If heavier loads are places on the cooker, these
loads can trip over. It may cause personal injuries.
40. Allow disconnection of the appliance after
installation, by accessible plug or a switch in the
fixed wiring, unless.
Electrical Safety
Gas Safety
1. Plug the appliance in a grounded socket
protected by a fuse conforming to the values
specified in the technical specifications chart.
2. Have an authorized electrician set grounding
equipment. Our company shall not be responsible
for the damages that shall be incurred due to
using the product without grounding according to
local regulations.
3.
WARNING: If the surface is cracked, turn off the
appliance to avoid risk of electric shock.
4. Never wash the appliance by spraying or pouring
water on it. There is a risk of electrocution.
5. Do not touch the plug with wet hands. Do not pull
the cord to plug off, always hold the plug.
6. Unplug the unit during installation, maintenance,
cleaning and repair.
7. Make sure the plug is inserted firmly into wall
socket to avoid sparks.
8. If the power supply cord (the cord with plug)
is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally
qualified personnel to prevent a hazardous
situation.
9. Do not use cut or damaged cords or extension
cords other than the original cord.
10. Do not use steam cleaners for cleaning the
appliance, otherwise electric shock may occur.
11. Make sure there is no liquid or humidity in the
outlet where the product plug is installed.
12. An omnipolar switch capable to disconnect power
supply is required for installation. Disconnection
from power supply shall be provided with a switch
or an integrated fuse installed on fixed power
supply according to building code.
13. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
14. Unplug the unit during installation, maintenance,
cleaning and repair.
15. Appliance is equipped with a type ‘’Y’’ cord cable.
16. The circuit breaker switches of the cooker shall be
placed so that end user can reach them when the
cooker is installed.
17. Fixed connections shall be connected to a power
supply enabling omnipolar disconnection. For
appliances with over voltage category below III,
disconnection device shall be connected to fixed
power supply according to wiring code.
18. Do not remove ignition switches from the
appliance. Otherwise, live electric cables can be
accessed. It may cause an electric shock.
1. This appliance is not connected to burning
products evacuation apparatus. This appliance
must be connected and installed according to
the installation regulations in force. Conditions
regarding ventilation must be considered.
2. When a gas cooking appliance is used; humidity,
heat and burning products are generated in the
room. First of all, make sure the kitchen is well
ventilated when operating the appliance and
maintain natural ventilation openings or install a
mechanical ventilation equipment.
3. After using the appliance heavily for en extended
period of time, additional ventilation may be
required. For example open a window or adjust a
higher speed for mechanical ventilation, if any.
4. This appliance must be used only in well ventilated
locations in accordance with the regulations in
force. Please read the manual before installing or
using this product.
5. Before positioning the appliance, make sure local
network conditions (gas type and gas pressure)
meets appliance requirements.
6. The mechanism cannot be run for longer than 15
seconds. If the burner is not on after 15 seconds,