Teseq NSG 435, Руководство пользователя

Страница: 52 / 58

52
NSG 435 ESD simulator
Description Compact ESD simulator with microprocessor
controller, large surface LC-display, built-in
HV-relay for contact-discharges, mains-
independent
Pulse data – standard Conforms to IEC/EN 61000-4-2
– special With exchangeable networks/test fingers for
other standards
Pulse network – standard 150 pF/330 Ω as per IEC/EN 61000-4-2
– special Exchangeable networks for other standards as
accessories
Range R = 0 Ω to 10 kΩ
Range C = 60 pF to 1000 pF
Discharge voltage 200 V to 16.5 kV (in 100 V steps)
(air-discharge) (Tolerance ±5%, 1 to 16 kV)
Discharge voltage 200 V to 9 kV (in 100 V steps)
(contact-discharge) (Tolerance ±5%, 1 to 9 kV)
Test finger -standard Ball and point as per IEC/EN, exchangeable via
locking ring
Voltage measurement On HV-side, dynamic
Accuracy better than ±5% (1 kV to 16.5 kV)
Arcing recognition Indicated also acoustically in the «single»
operating mode
Holding time > 5 s
Charge resistor Rch 50 MΩ
Triggering Trigger button in handgrip or by remote trigger
unit with 5 m (197’’) optical cable
Power supply Battery in handgrip, exchangeable, charging
time: approx. 3 hours
Mains power unit as an accessory
10 TECHNICAL SPECIFICATIONS