TESA MICRO-HITE, Инструкция по эксплуатации

Страница: 105 / 163

Instruction manual for MH & MH+M
105
17.3 Use of the
measurement
blocks
The advantage of this integrated calculator is that the results of previous measurements can
be reused for calculation of more complex functions that cannot be defined directly via the
control panel.
It is important to know in which way the measurement results can be taken into account in the
calculation function. You simply have to
•
quickly double-click on the measurement block and the value will automatically be copied
in the bar dedicated to writing the calculation function.
•
Move the selection (blue bar) using the keys , , and then validate your choice using
.
17.4 Changing
measurements
list
The two measurements’ lists of
ST1 and ST2 modes are independent from each other. By
default, it is the memory of the last mode that has been activated that will automatically be
displayed when entering the
Calculator mode.
However, it is possible to go from one memory to the other by clicking on the context-based
action key or .
At each change of measurement list, the function defined in the calculator
is automatically erased.
17.5 Customised
calculation
function
The display of the Calculator mode is defined by two lines: