Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 35 / 204

• View reports
• Send reports
• Perform all tasks
• Clear alarms
• Change his or her own password
Signing In to the System
Complete the following steps to sign in to the system:
1. Touch
Sign In
.
The Sign In window appears.
2. Touch the User ID field.
A data entry pad appears.
3. Use the data entry pad to enter your user ID, and touch
Enter
.
The data entry pad closes.
4. Touch the Password field.
A data entry pad appears.
5. Use the data entry pad to enter your password, and touch
Enter
.
The data entry pad closes.
6. Touch
Sign In
.
The system signs you in and displays your user ID on the status bar.
Signing Out of the System
Complete the following steps to sign out of the system.
From the home screen:
1. Touch
Sign Out
.
The system prompts you to confirm that you want to sign out of the system.
2. Touch
Yes
.
The system signs you out.
Changing Your Password
If user authentication is enabled, your system administrator assigns you a user ID and password that you
use to access the system. You can change your password at any time when you are signed in to the system.
Complete the following steps to change your password:
1. Touch
Utilities
.
The Utilities screen appears.
2. Touch
Change Password
.
The Change Password window appears, as shown in Figure 2-10.
Introduction
2-16 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1