Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 175 / 204

Configuration Reports
The configuration report contains information about how a Quantum system is configured. It records
the configuration baseline and any changes made to the configuration once the baseline is set. The
configuration report also records the date and time when each configuration change was made. If user
authentication is enabled, the system also records the user who made the change. The following
information is included in a configuration report:
•
Display settings
–
Time format, date format, and type of decimal separator
• System settings
–
Alarm sound, incubator status, temperature set point, and low-temperature alarm
configuration
• Default settings for all tasks
–
Records if steps were omitted from a task
• Report settings
–
Run report generation, automatic report sending, selected report formats, and IP address for
the FTP server that receives reports
• Network settings
–
DHCP status, static IP address, static netmask, and static gateway address
• User settings
–
User authentication status, touch screen lock, and reporting of failed sign-in attempts
• Remote alarm notification settings
–
IP address for the remote alarm server and remote alarm server port
The Quantum system does not store configuration reports, so you can only view the current
configuration report or send it to an FTP server.
Reports
15-4 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1