]
TERSUS-GNSS 14
4.
Trouble Shooting
4.1
Why my configuration lost after the board is power off?
You need execute „saveconfig‟ command to save your configuration to the
non-volatile memory before power off; otherwise, your configuration will lost as long
as it is powered off.
4.2
Why I can receive NMEA data from the board, but I cannot configure it?
It depends on the serial tool you are using. The board can only recognize the
command end up with „\r\n‟ (carriage and line feed) and these two characteristics
need to be added automatically by the serial tools, which is often referred as „new line
mode‟. In order to avoid this case, we recommend you configure the board with
Tersus GNSS Center, which can be downloaded from our website.
