User Manual for David30 GNSS Receiver v2.0
16
2. Devices in David30 Package
This chapter is to give detailed introduction about all the devices in the
package. David30 has five variants, which are convenient for customers to
select according to their application. Different accessories are included in each
variant. Table 2 gives a brief description of the five variants. For more details,
refer to section 2.1 to section 2.5. All the five variants are shipped in a yellow
plastic box shown as below.
Figure 2.1 Devices in the box
Table 2 Five David30 Variants
David30 variants
Description
Rover Kit Network
Mode
The David30 receiver will receive RTK corrections from a NTRIP
caster or a TCP server.
Rover Kit with 2W
Radio Station
The David30 receiver will receive RTK corrections from an external
2W radio.
Base Kit Network
Mode
The David30 receiver will output RTK corrections to a NTRIP caster
or a TCP server.
Base Kit with 2W
Radio Station
The David30 receiver will output RTK corrections to an external 2W
radio.
Base Kit with 28W
Radio Station
The David30 receiver will output RTK corrections to an external 28W
410~470MHz radio.
!
1. Rover Kit Network Mode and Base Kit Network Mode can work independently.
2. Rover Kit with 2W Radio Station must work with Base Kit with 2W Radio Station or
Base Kit with 28W Radio Station.