User Manual for BX40C GNSS Board v2.0
31
Figure 5.3 Folders in the GNSS_U disk
!
It is recommended to ensure the computer has available CPU and
memory when downloading files.
5.3 Communicate with STRSVR Tool
The steps of BX40C communicating with STRSVR tool are as follows:
1) Power on the BX40C receiver, connect COM1 and COM2 to the computer.
COM2 is to communicate with Tersus GNSS Center, COM1 is to receive
RTK corrections from a NTRIP caster.
2) Run RTKLIB -> STRSVR, select serial for output type. And click the option
button for serial port COM1 and configure it.
Figure 5.6 Configure serial port COM1
