26
/
167
hang from the rear side of the vehicle after being bound with the strapping tape so as
to enter into the driving cab through the rear side or rear window.
Figure 26 Tighten the 3M RF cable to the antenna (Do not use pliers or other tools to avoid
damage to the connector)
Figure 27 Route and bind the 3m RF cable at the driving cab top
4.1.2
Installation of Radio Receiving Antenna
AG960 has only one radio receiving antenna to receive the differential information
transmitted from the Beidou reference station. The radio receiving antenna is installed
onto the tractor as described below.
4.1.2.1
Installation Position of Radio Receiving Antenna
To ensure a vast field of view, the radio receiving antenna must be mounted to the
driving cab top instead of other positions such as rear side fender, engine hood of the
vehicle. Otherwise the reference station signal may be shielded by the driving cab and
thus cause intermittent or unstable signal affecting the automatic operation.
The distance between the radio receiving antenna and any satellite navigation antenna
