m3po
43
Updating "M3PO Advanced Monitor" from version 2.xx .
•
Insert the CD in the m3po.
•
Switch the m3po off and wait for about 2-3 seconds.
•
Press down the STOP button when switching back on.
•
After initialization, the new "M3PO Advanced Monitor" will appear.
•
Press the MENU button and
•
select "Update from CD".
•
The display will now indicate , that it has found an update (Update was found). If you do
not wish to update at this point, press the soft button (ESC). Otherwise...
•
... press down the wheel.
•
After a few seconds, the message "Update finished" will appear.
The m3po will now resume normal operation. The update has been installed successfully.
Note: Menu settings will be lost after auto-reset (see page 28, "The More Menu.")
Caution:
A power cut during the software installation process may
cause damage to the operating system (EEPROM). Never perform a
software update during thunderstorms or in areas with high fluctua-
tions in the mains voltage.
Содержание M3Po
Страница 1: ...1 m3po 18 05 00 Manual English ...