Copyright
©
2007 Terramite Corporation
2.16
WWW.TERRAMITE.COM/SAFETY
Charleston, WV/USA
USA 1.800.428.3772
Intl. 1 .304.776.4231
Read Operators Manual For Safety
PARTS MANUAL
Service Operations
&
ITEM
DESCRIPTION/LOCATION
MAINTENANCE SCHEDULE
1. Grease Fittings
a.
(2) Bearing on Front Fork
Grease all fittings daily
b.
(1) Variable-Speed-Pedal under
floorboard
c.
(2) Left and Right on Brake Rod
d.
(1) Foot Brake
2. Hydraulic Oil
With oil hot, oil level should be in
Change Hydraulic Oil every 6
center of eye on side of hydraulic tank
months or as needed.
and/or 1" below top of tank.
Capacity:
20 Gallons
3. Hydraulic Spin-On
a.
10 Micron Part #21002
Change both Spin-On filters every
Filters
2 under floorboard.
3 months.
b.
Hydraulic Tank Screen Part #38072
Remove and clean every 6 months.
at rear of Hydraulic Tank.
c.
High Pressure Filter Element
Change every 6 months.
Part #38019 inside hood and to right
of engine.
ITEM
LOCATION
FUNCTION
C. Rear position allows unit to travel
in reverse when the variable speed
pedal is depressed (See Item 4).
5. Keyswitch
Centrally located below the steering
Preheats engine glow plugs when
wheel.
turned and held in full left position,
starts engine when turned and held in
full right position. 1st "Notch" positions
from full right is "Run", and 2nd
"Notch" position from full right is
"Off". (On Kubota ONLY)
6. Broom Rotary
Located to the right of the steering
When pushed forward broom sweeps
wheel.
forward, when in center position,
broom stops. Variable speed rotation.
7. Broom Left-To-Right
Located to left of and furthest
When pushed forward, right end of
from the steering wheel.
broom moves towards rear when
pulled back, right end of broom moves
forward.
8. Broom Lift Control
Located to left of and closest to
When pushed all the way forward and
the steering wheel.
locked into detented position, broom
head goes to lowered and operating
float position. When lever is pushed
forward broom head raises off of surface.
9. Engine Throttle
To right of and below the steering
To set engine operating speed.
wheel.
Machine Operation Control Location (continued)
Lubrication and Maintenance Chart
Содержание TSS46
Страница 1: ...Courtesy of Machine Market ...