TERMA SOA, Руководство пользователя, Страница: 67 / 84

67 User Manual - SKT 4 Blue, SOA Blue electric heating element
EN
Remote operation
(via a mobile device with an installed control app)
SKT 4 Blue controller has a built-in and constantly operating Bluetooth
Low Energy communication module. It is used to create weekly work
schedules of the heating element and to remotely control the device
using popular mobile devices, both smartphones and tablets, working
on the Android or iOS* platform. The heating element is seen by other
Bluetooth devices as a Heating Element SKT Blue.
To pair devices, it may
also be necessary to provide an authorisation code: 123456..
In order to start the pairing process, press and hold the button for
5 seconds. The icon will begin to flash. Pairing process takes about 30
seconds. The icon flashes also, whenever an active connection (infor-
mation exchange) is established with an external control device.
Heating mode
Use the key +/- to set the required level. It is possible to set 1 of 10 heat-
ing levels: 0 - 100% of the nominal heating output (the set value equal to
0 means that the device will not heat), or a range of 15 ... 30° C when meas-
uring the room temperature.
TIMER mode
The control mobile application allows to set timer mode for anything be-
tween 1 – 240 minutes, in all available temperature ranges as well as to
choose the mode of temperature measurement either radiator tempera-
ture or room temperature.
Automatic heating programme cycles
The control mobile application allows to programme several different 7-day
heating cycles and save them on any paired heating element. Successful sav-
ing of heating programme cycles is followed by a message on your mobile
device and a horizontal line on the display of the device. From this moment,
the heating element works according to the saved heating programme cycle.
Anti-freeze mode
In case the device is off (switched off with button ) but remains con nected
to the mains and the ambient temperature falls below 6°C, the device will
switch itself on to prevent heating agent in a radiator from freezing. An ‘F’
letter will blink on the display unit until the anti-freeze mode finishes, which
is when the temperature rises above 6°C.
*QR code to download the user manual for the Terma BlueLine app is on the last page of
this manual