Installation guide Alex ONE 1140x500mm - E8
Please read the instructions in full before starting to fit your radiator.
• Please check that all parts listed are present before starting installa
-
tion.
•
Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
• Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
• The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
• Terma radiators are designed for closed heating systems.
• The radiator should be fitted at least 100 mm from the floor to
maximise heat efficiency.
• Noting the distances between bracket centres, mark out the
position of the brackets on the wall.
• Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecting screw with a washer (2)
attach mounting bracket-1 (3).
• Guide radiator brackets into mounting brackets - 1(3) and fix with
connecting screws (4)
• Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installation.
• Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
• Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installation and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256
22
30
30
E8
11
40
500
70
130
10
00
14
470
ON/OFF
Refers to water and dual fuel version
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounting
bracket-1
bracket to
collector
fixing screw
air vent
allen key
(1)
(2)
(3)
(4)
