Slow Control Functions
Personal ObservationMultimeterBasic Hand Tools
SK315 / SK405 / SK415 / SK565 / SK575
Necessary Tools:
Type of Tip:
Applicable Models:
TECHNICAL TIPSCRANES
Страница 1: ...Slow Control Functions Personal Observation Multimeter Basic Hand Tools SK315 SK405 SK415 SK565 SK575 Necessary Tools Type of Tip Applicable Models TECHNICAL TIPS CRANES ...
Страница 2: ...is machine You read understand and obey o The manufacturer s instructions and safety rules o Employer safety rules and workplace regulations o Applicable government regulations o You have the appropriate tools lifting equipment and a suitable location The information contained in this technical tip is a supplement to the service manual Consult the appropriate service manual for your machine for sa...
Страница 3: ... in first step into the wind The crane doesn t gain momentum within the time period set in the PLC parameters 2 seconds that is expects to see the signal from the proximity switch TECHNICAL TIPS CRANES If you have any doubts about how to perform any procedure please contact our Technical Support team through our Web Portal www myterexcranes com and access our Livechat ...
Страница 4: ...a signal from the proximity switch at input E10 8 As the crane swings this input will flasn ON and OFF as the proximity switch passes the gear teeth of the swing bearing exterior race TECHNICAL TIPS CRANES If you have any doubts about how to perform any procedure please contact our Technical Support team through our Web Portal www myterexcranes com and access our Livechat ...
