Terex Series AL4000, Руководство по эксплуатации и обслуживанию

Страница: 7 / 73

•
Do Not Touch Hot Parts
The exhaust manifold and tailpipe are very hot. Parts of the engine are also hot. Avoid touching hot parts of
the engine or tailpipe. Use protective gloves when handling hot parts.
•
Be Alert And Attentive To The Task
Read the safety instructions and operating procedures before attempting to troubleshoot or work on this unit.
Also read the engine manual, which is a separate booklet that is provided with this manual.
Do not work on this equipment when mentally or physically fatigued.
Do not work on this equipment when under the influence of performance impairing drugs or alcohol.
If this manual becomes lost, order a new one from TEREX-Amida so future operation and maintenance
personnel may read these instructions.
•
Beware of Moving Parts
Avoid being hit or pinched by the moving parts of this unit.
Loose jackets, shirts, neckties, or sleeves should not be worn while working or running a unit.
Only remove guards or protective devices from unit temporarily to gain access for maintenance. Always
replace guards and protective devices promptly.
Keep your hands away from moving parts. Particularly, be sure to keep hands clear of the blower and
alternator belts when the engine is running.
•
Beware of Traffic Hazards
Stand clear of traffic when starting or checking the unit along the road.
Check the fuel tank, oil pan, and fuel and oil lines for leaks that would spill fuel or oil on the road.
Check fasteners and mounting brackets periodically to insure all are tight and nothing is in danger of falling
off during transit.
•
Use Only Equal Replacement Parts
When a part fails and needs to be replaced only use equivalent size, length, thread, grade, and material.
Replace stainless steel fasteners with stainless steel fasteners. The engine may use metric or SAE bolts, but
all other bolts are generally SAE thread. Be sure to use Grade 8 bolts and nuts to mount the genset to the trailer.
Replace the fuel and oil hoses with items of equal material, diameter and length.
Contact the manufacturer, TEREX-Amida, regarding replacement parts to ensure a correct repair.
•
Use Caution Working Near Lamps
Metal halide lamps produce short wave ultra-violet radiation and can cause serious skin burn, or eye inflam-
mation if the outer envelope of the lamp is broken or punctured. Do not use where people will remain for
more than a few minutes unless adequate shielding or other safety precautions are used.
6
Discount-Equipment.com