Terex Genie Z-40/23N, Руководство по обслуживанию и ремонту

Страница: 84 / 125

Service and Repair Manual September 2016
Control System Fault Codes
74 Z-40/23N, Z-40/23N RJ Part No. 1268528
Error Source Error Type
ID Name ID Name Condition Solution
33
SEC_DN_VALVE
Secondary boom
down valve.
12
15 Value too high
Value too low
Secondary down function
disabled.
Check for open or short from TCON
(C14-8) to the secondary down coil.
Replace coil.
36
JIB_UP_VALVE
Jib boom up valve.
12
15 Value too high
Value too low
Jib up function disabled.
Check for open or short from PCON
(C29-5) to the jib up coil. Replace
coil.
37
JIB_DN_VALVE
Jib boom down
valve.
12
15 Value too high
Value too low
Jib down function
disabled.
Check for open or short from PCON
(C29-6) to the jib down coil. Replace
coil.
41
TT_ROT_JYSTK
Turntable rotate
joystick.
11
16 Shorted to supply
Value at 0V
Turntable rotate
functions disabled.
Inspect and repair joystick wiring.
Replace joystick.
17
Not calibrated
Neutral out of range
Turntable rotate
functions disabled.
Check neutral output range is within
2000 to 3000 mV. Calibrate joystick.
Replace joystick.
42
TT_CW_VALVE
Turntable rotate
clockwise valve.
12
15 Value too high
Value too low Turntable rotate
clockwise function
disabled.
Check for open or short from TCON
(C29-8) to the turntable CW coil.
Replace coil.
43
TT_CCW_VALVE
Turntable rotate
counter clockwise
12
15 Value too high
Value too low Turntable rotate
counterclockwise
function disabled.
Check for open or short from TCON
(C29-7) to the turntable CCW coil.
Replace coil.
46
PROT_CW_VALV
Platform rotate
clockwise valve.
12
15 Value too high
Value too low Platform rotate clockwise
function disabled.
Check for open or short from PCON
(C29-3) to the platform rotate CW
coil. Replace coil.
47
PROT_CCW_VLV
Platform rotate
counter clockwise
12
15 Value too high
Value too low Platform rotate
counterclockwise
function disabled.
Check for open or short from PCON
(C29-4) to the platform rotate CCW
coil. Replace coil.
51
DRIVE_JYSTK
Drive joystick.
11
16 Shorted to supply
Value at 0V
Drive functions disabled.
Inspect and repair joystick wiring.
Replace joystick.
17
Not calibrated
Neutral out of range
Check neutral output range is within
2000 to 3000 mV. Calibrate joystick.
Replace joystick.