Terex Genie S-60 DC, Руководство по обслуживанию и ремонту

Страница: 106 / 171

Service and Repair Manual July 2021
Pump Control Fault Codes
94 S ® -60 DC • S ® -60 FE Part No. 1299608GT
Pump Controller Fault Handling
The pump controller is located on the engine side of the machine and mounted to the battery
compartment.
The pump controller can detect faults or error conditions. Faults can also be detected by the machine
control system and PCON display.
Diagnostics information can be obtained by observing the fault code ID issued by the flashing status
LED's.
The controller status LED's produce flash code ID's displaying all the currently set faults in a repeating
cycle. Each code ID consists of two digits.
The red LED flashes once to indicate that the first digit of the code ID will follow; the yellow LED then
flashes the appropriate number of times for the first digit.
The red LED flashes twice to indicate that the second digit of the code ID will follow; the yellow LED
flashes the appropriate number of times for the second digit.
Example:
The controller LED's will display this repeating pattern:
Fault Code Name
23 B+ Undervoltage Cutback
Red Yellow Red Yellow
first digit 2 flashes second digit 3 flashes
1 status LED
1