Second Edition • First Printing
Operator's Manual
Operating
Instructions
Part No. 1297730GT
QS
™
-R12 • QS
™
-R15 • QS
™
-R20 41
Adjustable Work Tray Operation
To adjust the work tray:
1
Grasp the lower handle of the adjustable work
tray with one hand.
2
With the opposite hand, pull the snap pin out
to disengage.
3
Gently pull up on the lower handle and rotate
the tray outward until the snap pin is no longer
aligned with the snap pin hole.
4
Remove hand from the snap pin and grasp the
upper handle.
5
Using the upper handle, lift the tray to the
desired height while the hand on the lower
handle rotates the tray outward approximately
45 degrees.
6
When the desired height is reached, use the
lower handle to fully rotate the tray to a
horizontal position. Engage the support bar
with the rail teeth. Engage snap pin into the
locked position.
Note: The snap pin must be properly engaged for
proper work tray use.
1
snap pin
2
work tray mount
3
lower handle
4
upper handle
