manualshive.com logo in svg

Terex Genie GTH-5519, Руководство оператора


Поделиться
Скачать
background image

April 2019

50                                                                         GTH-5519                                   Part No. 

57.0009.0619GT

Fourth Edition - Third Printing

Maintenance

Scheduled Maintenance

Maintenance performed quarterly, annually and 
every two years must be completed by a person 
trained and qualified to perform maintenance on 
this machine according to the procedures found in 
the service manual for this machine.

Machines that have been out of service for more 
than three months must receive the quarterly 
inspection before they are put back into service.

Check the Battery

Proper battery condition is essential to good 
machine performance and operational safety.
Improper fluid levels or damaged cables and 
connections can result in component damage and 
hazardous conditions.

  Electrocution hazard. Contact with hot or live 

circuits may result in death or serious injury.
Remove all rings, watches and other jewelry.

  Bodily injury hazard. Batteries contain acid.

Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda 
and water.

1  Put on protective clothing and eye wear.

2  Be sure that the battery cable connections are 

tight and free of corrosion.

3  Be sure that the battery hold-down brackets 

are in place and secure.

Note: Adding terminal protectors and a corrosion 
preventative sealant will help eliminate the 
corrosion on the battery terminals and cables.

Содержание Genie GTH-5519




































































Отзывы:

Нет отзывов

Похожие инструкции для Genie GTH-5519

Бренды по названию

Популярные бренды

Загрузить еще бренды