Operator's Manual
Third Edition • First Printing
Specifications
50
GS
™
-
2669RT • GS
™
-
3369RT • GS
™
-4069RT
Part No. 1305657GT
Specifications
GS-2669RT
Height, working maximum
32 ft
9.8 m
Height, platform maximum
26.2 ft
10 m
Height, stowed maximum,
rails up
102 in
2.59 m
Height, stowed maximum,
rails lowered
75.5 in
1.92 m
Height, guard rails
58 in
1.47 m
Width
69 in
1.75 m
Length, platform retracted
123 in
3.12 m
Length, platform retracted,
models with outriggers
148 in
3.76 m
Length, platform extended
177.5 in
4.51 m
Length, platform extended,
models with outriggers
189.5 in
4.81 m
Length, outside platform
extended
170 in
4.32 m
Maximum load capacity
1500 lbs
680 kg
Maximum wind speed
28 mph
12.5 m/s
Wheelbase
90 in
2.29 m
Turning radius (outside)
181.2 in
4.6 m
Turning radius (inside)
83 in
2.11 m
Ground clearance
9½ in
24 cm
Weight
7295 lbs
3309 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Controls
Proportional
AC outlet in platform
Standard
Platform dimensions
Platform length x width
110 in x 63 in 2.79 x 1.6 m
Platform extension
length
60 in
152.4 cm
Drive speeds
Stowed, maximum
3.5 mph
5.63 km/h
Platform raised,
maximum
0.3 mph
40 ft/90 sec
0.48 km/h
12.2 m/90 sec
Maximum hydraulic
pressure (functions)
3500 psi
241 bar
Tire size
26 x 12 in
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
2
.
Highest root mean square value of weighted acceleration
to which the whole body is subjected does not exceed
1.6 ft/s
2
or 0.5 m/s
2
.
Airborne noise emissions
Sound pressure level at ground
workstation
<85 dBA
Sound pressure level at platform
workstation
<79 dBA
Guaranteed sound power level
<108 dBA
Maximum side slope rating, stowed
position
40% (22°)
Maximum slope rating, stowed position
40% (22°)
Note: Slope rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Floor loading information
Tire load maximum
2854 lbs
1294 kg
Outrigger load, maximum
2854 lbs
1294 kg
Tire contact pressure
71.9 psi 5.06 kg/cm
2
496 kPa
Outrigger contact pressure
36.8 psi 2.59 kg/cm
2
254 kPa
Occupied floor pressure
173 psf
846 kg/m
2
8.3 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Operating temperature
For ambient temperatures consistently
below
0°F
(-17°C) - use Chevron Aviation A Arctic hydraulic fluid or
equivalent.
For ambient temperatures consistently
above
0°F
(-17°C) - use Chevron Rando HD MV hydraulic fluid or
equivalent.
For operating temperatures consistently above 205°F
(96°C) - use Shell Tellus S2 V 46.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
