background image

Operator's Manual

 

Second Edition • First Printing

 

Operating Instructions 

 

 

48 GS

-1330m

 

Part No. 1301858GT 

 

 

Battery and Charger Instructions 

Observe and Obey: 

 

Do not use an external charger or booster 
battery. 

 

Charge the battery in a well-ventilated area. 

 

Use proper AC input voltage for charging as 
indicated on the charger. 

 

Use only a Genie authorized battery and 
charger. 

To Charge Battery 

1

 

Be sure the batteries are connected before 
charging the batteries. 

2

 

Open the battery compartment. The 
compartment should remain open for the entire 
charging cycle. 

Maintenance-free batteries 

1

 

Connect the battery charger to a grounded AC 
circuit. 

2

 

The charger will indicate when the battery is 
fully charged. 

Standard Batteries 

1

 

Remove the battery vent caps and check the 
battery acid level. If necessary, add only 
enough distilled water to cover the plates. Do 
not overfill prior to the charge cycle. 

2

 

Replace the battery vent caps. 

3

 

Connect the battery charger to a grounded AC 
circuit. 

4

 

The charger will indicate when the battery is 
fully charged.  

5

 

Check the battery acid level when the charging 
cycle is complete. Replenish with distilled 
water to the bottom of the fill tube. Do not 
overfill. 

 

Содержание Genie GS-1432m




























































Отзывы: