Terex Genie GR-12, Руководство оператора

Страница: 14 / 51

Operator's Manual Fifth Edition • First Printing
12 GR-12 • GR-15 • GR-20 Part No. 133571
Work Area Safety
Do not push off or pull
toward any object outside
of the platform.
Maximum Maximum
allowable number of
Model side force occupants
ANSI/CSA 100 lbs / 445 N 1
Do not alter or disable the limit switches.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not replace items critical to machine stability
with items of different weight or specification.
Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weigh 62 pounds / 28 kg.
Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Mounting attachments for holding
tools or other materials onto the platform,
toeboards or guard rail system can increase the
weight in the platform and the surface area of the
platform or the load.
Do not raise the mast when wind speeds may
exceed 28 mph / 12.5 m/s.If wind speeds exceed
28 mph / 12.5 m/s when the platform is raised,
lower the platform and do not continue to operate
the machine.
Do not operate the
machine in strong or gusty
winds. Do not increase the
surface area of the platform
or the load. Increasing the
area exposed to the wind
will decrease machine
stability.
Use extreme care and slow
speeds while driving the
machine in a stowed
position across uneven
terrain, debris, unstable or
slippery surfaces and near
holes and drop-offs.
Do not drive the machine on or near uneven
terrain, unstable surfaces or other hazardous
conditions with the platform raised.
Do not use the machine as a crane.
Do not push the machine or other objects with the
platform.
Do not contact adjacent structures with the
platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
Work station tray is considered part of the platform.
Do not use the platform controls to free a platform
that is caught, snagged or otherwise prevented
from normal motion by an adjacent structure. All
personnel must be removed from the platform
before attempting to free the platform using the
ground controls.