Terex Evoquip Bison 120 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 224

Terex Evoquip Bison 120 Скачать руководство пользователя страница 68

5 Transportation

Operations Manual

Bison 120

20-07-2018

Page 5-16

Revision 2.0

(2) Lifting Machine off the Trailer

NOTICE

In order to load or unload the machine into and from a lorry, the lifting points on the chassis can be

used, ensuring that a harness of adequate resistance to the weight to be lifted. It is recommended

to use a spreader frame to minimize the risk of damaging the machine when lifting.
Ensure that the lorry has its parking brake on and apply wedges to the tyres to avoid any possible

slippage during loading/unloading.
When unloading the machine, the operator must always maintain a safe distance from the machine

in order to avoid any incident should the harness break or slip.

PROCEDURE

1.  Observe all safety warnings.
2.  Remove the fastenings securing the machine to the transporter.
3.  Attach a suitable harness to the 4 lifting points/ tie down points.

Figure 5.15 - Lifting Machine on Trailer

4. Ensure that all

loose items are carefully stowed and secured.

5. Using suitable lifting equipment, lift the crusher from the back of the transporter.

«
...
66
67
68
69
70
...
»

Содержание Evoquip Bison 120

































































































































































































































Отзывы:

Нет отзывов