Terex Evoquip Bison 120, Руководство по эксплуатации

Страница: 25 / 224

Operations Manual
Bison 120
20-07-2018
Page 2-9
Revision 2.0
Safety 2
2.3 Work Area Safety
(1) General Work Area Guidelines
Operators must have received specific training in all operating and service tasks as required for
the safe operation and service of the machine. Operators must know the location and correct
operation of all controls and safety features such as remote stop buttons and isolator switches.
Operators must be aware of all moving parts on the machine.
Keep the work area as neat and as clean as practical. Keep your equipment clean and free of
dirt and grease so it can be checked for loose, cracked or broken parts. Replace defective parts
as soon as they are discovered.
The guards provided are designed and manufactured to ensure so far as reasonably practicable
that the machinery on which they are fitted can be operated safely and without risk to health
when properly used. However, it cannot be guaranteed that the guards provided will meet the
requirements laid down by individual Inspectors and any additional guard and/or modification to
guarding supplied..
Walkways should only be used when the machine is turned off, unless to perform specific
maintenance procedures which require the machine to be operational. In this instance, only
suitable trained and authorised personnel equipped with the correct personnel protective equipment
should be allowed access and the machine must be running empty and cleared of all material
beforehand.
Always check that walkways and handrails are fully secured in place before using.
Do not smoke or allow smoking near flammable fuels or solvents. Use non flammable solvents
for cleaning parts and equipment. Know where fire extinguishers and other fire suppression
equipment are located and learn how to use them.
Always use hoisting equipment for heavy loads. Regularly check hooks, cables, shackles and
chains for stretch and wear. Never hoist loads over people. Never overload hoists, cranes or
other lifting devices.
Avoid electrical and static sparks and any open flame while handling, storing, moving or pouring
fuels, electrolytes for batteries, hydraulic fluids or coolants.
(2) Safety Warnings and Labels
You can be injured if you do not obey the safety instructions as indicated on warning signs.
Observe all safety instructions and warnings attached to the equipment.
Ensure that safety instructions and warnings attached to the equipment are always complete and
perfectly legible. Keep warnings and instruction labels clean and up to date.
Replace unreadable or missing labels with new ones before operating the machinery. Make sure
replacement parts include warning or instruction labels where necessary.
(3) Modifications
Never modify, or make any additions or conversions to the machine which affects safety without
the written approval from the manufacturer.
If there are safety relevant modifications or changes in the behavior of the machinery during
operation, stop the machine and lock out and tag out immediately. Report the malfunction to the
responsible authority/person.