ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
7
2.
General Information
ENC-
300™ ™ can be ordered as blade-based units or as chassis-based devices. Please specify at your
order which ENC-
300™™ type (blade-based or chassis-based) do you exactly want.
ENC-
300™™ blade-based units can be used in the FR-610 multi-channel chassis, which can hold up
to max. 6 Teracue blades. Inside the FR-610 chassis different types of ENC encoder blades, DEC
decoder blades can be ‘mixed and matched’.
ENC-
300™™ chassis-based devices are fixed implemented in a chassis. So you do not need purchase
a chassis separately.
All equipment (like the FR-610 chassis) and ENC-
300™ accessories are handled as model options and
need to be purchased separately.
2.1
Unpacking the Encoder
When you unpack the ordered equipment, please make sure that all the equipment is complete.
2.1.1
ENC-
300™ blade-based units
Normally the ENC-
300™ blades are pre-fit into the according chassis that the encoders have been
ordered with.
If ENC-
300™ blades are ordered and shipped separately, please be careful when handling the blades.
Be sure to avoid electrostatic influence when touching the blades.
After unpacking, your ENC-
300™ should include the following:
1 x Teracue DVD which includes this user guide
1 x ENC-
300™ H.264 HD Encoder blade
1 x Breakout cable ‘S’
2.1.2
ENC-
300™ chassis-based devices
After unpacking, your ENC-
300™ should include the following:
1 x Teracue DVD which includes this user guide
1 x ENC-
300™ H.264 HD Encoder (chassis-based)
1 x Breakout cable ‘S’