ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
36
3.4.10 Menu: Encoder / XPlayer
The menu ‘XPlayer’ starts the ‘Standalone XPlayer’, if an ‘XPlayer’ is installed on the client PC. You can
start the ‘XPlayer’ by clicking the XPlayer-Link inside the ‘Encoder’ menu.
Afterwards the ‘XPlayer’ automatically displays the stream of the ENC-300.
Figure 21: Encoder/XPlayer page with opened XPlayer
If the XPlayer is not installed on the client PC, the XPlayer-Link will have no function.
.!.
Requirement for this feature: The XPlayer must be installed.