Teracom TCW112-CM, Руководство пользователя

Страница: 14 / 20

TCW112-CM-R3.2 - March 2018 Page 13
10. Control and monitoring using SNMP
TCW112-CM can be configured and monitored through SNMP (Simple Network Management
Protocol). This could be done using every SNMPv.1 compatible program. Parameters that can be
changed, are grouped according to their functions in the tables below. To obtain a valid OID number
it is necessary to replace “x” symbol with “1.3.6.1.4.1.38783”. To save the changes
configurationSaved (OID x.3.7.0) should be set to “1”.
10.1 Product
OID Name Access Description Syntax
x .1.1.0 name read-only Device name String
x .1.2.0 version read-only Firmware version String
x .1.3.0 date read-only Firmware release date String
10.2 Setup -> network
network
OID Name Access Description Syntax
x .2.1.1.0 deviceIPAddress read-write Device IP address IpAddress
x .2.1.2.0 subnetMask read-write Subnet Mask IpAddress
x .2.1.3.0 gateway read-write Gateway IP address IpAddress
x .2.1.4.0 deviceMACAddress read-write Device MAC address OCTET STRING (SIZE(6))
x .2.1.5.0 dhcpConfig read-write DHCP configuration ON/OFF INTEGER { off(0), on(1) }
x .2.1.6.0 dns read-write Domain Name Server Address IpAddress
x .2.1.7.0 hostName read-write Host Name String (SIZE (0..38))
10.3 Setup -> snmpSetup
SNMP
OID Name Access Description Syntax
x .2.4.1.0 snmpConfiguration read-write SNMP Configuration ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x . 2.4.2.0 trapEnabled read-write Indicates if this trap entry is enabled or not INTEGER { no(0), yes(1) }
x . 2.4.3.0 trapReceiverIPAddress read-write Trap receiver IP address IpAddress
x . 2.4.4.0 trapCommunity read-write Trap community String (SIZE (0..13))
x .2.4.5.0 trapInterval read-write Trap Interval INTEGER (1..253)
x .2.4.6.0 maxNumberOfTraps read-write Max Number of Traps INTEGER (1..253)
10.4 Setup -> oneWireSensor -> temperature
oneWireSensor -> temperature
OID Name Access Description Syntax
x .2.5.1.1.0 temperatureMin read-write Temperature minimum value INTEGER (-400..1250)
x .2.5.1.2.0 temperatureMax read-write Temperature maximum value INTEGER (-400..1250)
x .2.5.1.3.0 temperatureHyst read-write Temperature hysteresis INTEGER (0..1250)
x .2.5.1.4.0 temperatureAction read-write Temperature Action INTEGER { noAction(0), sendMail(1) }